User Manual

17
Figure: Configure Wireless PC Adapter
Configure Wireless PC Adapter
In this window (Figure: Configure Wireless PC Adapter), you
can configure your Wireless USB Host Adapter to settings that will
work best for your application.
SSID- Is the name that will appear for your Wireless USB Host
Adapter. You may change this name by typing in a different name
that is recognizable to you.
Channel- You can set a communication channel in the range of 1-
11, just as you can for the Wireless Device Adapter. You will want
to be set on the same channel as the Wireless Device Adapter
that you wish to connect with.
Click OK when you are finished making changes in this window.
USING THE WIRELESS USB SUPERBOOSTER EXTENDER