Product Specs

8
1. After the power cord is plugged into the electrical outlet, the Wireless Conference Room
Hub will be turned on and link established automatically.
When transmitter power is unplugged, receiver will enter Standby mode (POWER LED of
receiver is lit in red) when link is dropped for over 10mins.
2. When receiver is in Standby mode (Receiver POWER LED is lit in red), and transmitter is
powered, the transmitter will wake up the receiver and automatically to establish a link.
3. During the warm-up period, the POWER LED will blink white until the signal link between the
transmitter and the receiver is established. It will take around 15 ~ 20 seconds for boot up
and link establishment if the operation is in normal condition.
4. Ensure your TV set or projector is in “HDMI input” mode and is powered on.