TruLink™ 4 Port VGA over UTP Extender- Base Unit USER MANUAL Model #39960
Introduction The TruLink™ VGA over UTP Extender Base Unit, when used with the Remote Unit (part #39961), is a robust solution that allows you to extend your VGA signal up to 300 meters (1000 feet) over a Cat5E Unshielded Twisted Pair (UTP)cable. This solution is ideal for applications where your VGA monitor needs to be placed further than the average 100 foot VGA cable limitation.
Installation 1. Turn off the PC and monitor(s). 2. Connect the HD-15 female input connector on the VGA over UTP Extender Base Unit with the HD-15 male to male cable to the PC. 3. At each remote location, connect the HD-15 female output connector on the VGA over UTP Extender Remote Unit (sold separately) with HD-15 male cable from your monitor(s). 4. If you have local monitor, connect the HD-15 male cable from that monitor to the female output connector on the Base Unit. 5.
Specifications Function 39960 VGA In Connector HD-15 Female x 1 VGA Out Connector HD-15 Female x 1 RJ-45 Connector 4 Max. Resolution 2048x1536 60Hz Cable Distance (Max.) 300 meters/1000 feet Power Adapter (Min.) DC 12V 600mA Housing Aluminum Weight (lbs) .55 Dimensions (LxWxH) 5x3.25x1.
Wiring Information & Coding Conductor RJ45 Pin Color Code Identification Assignment for Conductor Pair 1 Pair 2 Pair 3 Pair 4 1501 Webster Street Dayton, Ohio 45404 www.cablestogo.
