DVI over UTP Extender Model: 39975 Operation Manual
DVI over UTP Extender Model: 39975 Operation Manual Thank you for purchasing the DVI over UTP Extender. We recommend that you read this manual thoroughly and retain for future reference.
Connecting the Extenders Note-If you do not have Cat5 cable already installed in-wall and you plan on installing Cat5 behind the wall, we recommend hooking up everything before you install the cable to make sure everything will be functional in your application. 1. Turn off your PC and monitor. 2. Connect a DVI male to male cable between the PC and the “DVI In” port on the DVI-L (DVI-Local) unit. DVI-Local unit 3.
Troubleshooting: Problem No picture Possible Solution 1. Make sure to use Cat5e cables. Other category cables may work, but results cannot be guaranteed using other types. 2. Be sure that each unit is positioned correct. The remote unit should connect to the display, and the local unit should connect to your PC. 3. Check to see if the power indicator lights are on and the units are plugged in.
Cables To Go™ One Year Warranty At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com.
