USER GUIDE VGA W/AUDIO OVER CAT5 EXTENDER Model: 39985(4 port base unit) 1
TABLE OF CONTENTS Introduction................................................................................................................................................2 Features.....................................................................................................................................................3 System Requirements...................................................................................................................................4 Package Contents.........
INTRODUCTION Thank you for purchasing the TruLink™ 4 Port VGA w/Audio over Cat5 Extender Base Unit. The Extender Base Unit when paired with the Extender Remote Unit is a robust solution that allows you to extend your VGA and audio signal up to 300 meters (1000 feet) over a Cat5E Unshielded Twisted Pair (UTP) cable. This solution is ideal for applications where your VGA monitor needs to be placed further than the average 100 foot VGA cable limitation.
FEATURES Extend your analog video and audio signals up to 300 meters (1000 feet) Cat5E UTP cabling enables easy and cost effective in-wall installation Supports the following resolutions using Cat5E* cabling: 100M 180M 200M 300M 1280x1024 1024x768 800x600 640x480 3
SYSTEM REQUIREMENTS Remote Unit- Part #39986 (sold separately) Cat5E UTP Cable HD15 and 3.5mm Audio connections on computer HD15 and 3.5mm Audio connections on monitor, projector, or other display device HD 15 male to male cables for display device connected and 3.5mm cables for speaker, projector, etc.
PACKAGE CONTENTS TruLink 4 Port VGA w/Audio over Cat5 Extender Base Unit DC 12V 600mA Power Adapter 1.2 meter (4 feet) M/M VGA Cable 1.2 meter (4 feet) M/M 3.
DEVICE OVERVIEW VGA Local 3.
DEVICE INSTALLATION Note: Before installation, you will need to have a TruLink VGA w/Audio Extender Base Unit (1 or 4 port Model: #39984 or #39985 respectively), and a TruLink VGA w/Audio Extender Remote Unit (#39986). (each sold separately) Step 1 Turn off your PC Step 2 Connect the Extender Base Unit (39984:1 port) or (39985:4 port) HD15 female Input connector with a HD15 male to male cable from your PC. Step 3 Connect the Audio In connector at the Extender Base Unit with a 3.
DEVICE INSTALLATION Step 7 Connect the Extender Remote Unit HD15 female connector with a HD15 cable to your monitor. Step 8 Connect the Extender Remote Unit Audio Output connector with an audio cable to the monitor or audio receiver. Step 9 Connect the Extender Base and Remote Unit power adapters Step 10 Turn on your PC, monitors, and other equipment, and your installation is complete! Note: Cat6 cables can be used but not recommended due to the skew of the signal pairs.
DEVICE INSTALLATION Application Diagram 39985 39986 Cat5 cable Microphone 9
TROUBLESHOOTING Problem No Operation No picture or signal; Poor picture. 1. Possible Solution Verify the 12V power supply is connected to the selector. 2. Make sure all devices are powered on. 1. Make sure your video display is properly set in PC mode. 2. Check the resolution on your PC. You may need to lower it to a resolution that is compatible with your monitor. 3. Adjust the Equalization switch that is located on the remote unit. 4. Turn all equipment power to off and then restore power.
TECHNICAL SPECIFICATIONS Product Number VGA In/Out Connector Audio In/Out Connector Mic In Connector RJ45 Connector Max Resolution Cable Distance Power Adapter Power Adapter Input Housing Weight Dimensions 39984 HD-15 female x2 (1 In, 1 Out) 39985 HD-15 female x2 (1 In, 1 Out) HD-15 female x1 Out 3.5mm Stereo Jack x1 3.5mm Stereo Jack x1 3.5mm Stereo Jack x1 3.5mm Stereo Jack x1 1 1280x1024 60Hz 300m (max.) DC 12V 600mA AC 100~240V/50-60Hz Aluminum 275g (.61 lbs.) 5.1 x 4.35 x .98 in. 3.
CABLES TO GO™ ONE YEAR WARRANTY At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-293-4970 or www.cablestogo.com. Cables To Go 3555 Kettering Blvd. Moraine, OH 45439 1-800-826-7904 www.cablestogo.
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product.
14
For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website. www.cablestogo.com VER. 1.0.4.9.
