User Manual

(Please refer to Figure 2 on page 3)
tep 1: Turn off your isconnect th
: Disconnect the Monitor Cable from your computer VGA port.
: Connect the Scan Converter to PC VGA port:
Plug one end of the supplied
"V
le " to the Scan Converter box "
other end to the PC's VGA port.
: Connect the Scan Converter to PC Monitor:
Plug one end of PC's Monitor Cable to the Scan Converter box
: Connect one end of supplied ''
other end to an electrical outlet
ate: To avoid damaging your Scan Converter, use only the supplied Power Adapter.
81111 (Please refer to Figure 3 as below)
ote:
S - Video provides a higher qualit), video than Composite Video and should be used if your TV has a
S
- Video Input.
ldeo (AIV) Cable " lo the TV's
Crrmposife Video (AN) Gable
ote: The converted Computer Image will transfer
Port
" by using the S - Video Cable or Composite Vide1
to nl through " S - Video (NTSCIPAL) Output
1 (AN) Cable.