USER GUIDE HDMI™ 1.
TABLE OF CONTENTS Introduction................................................................................................................................................2 Features.....................................................................................................................................................3 Package Contents......................................................................................................................................4 Device Overview..........
INTRODUCTION Thank you for purchasing the TruLink™ HDMI™ 1.3 Splitter. This 1.3 compliant HDMI Splitter with HDCP compatibility will connect an HDMI equipped source to two (40471) or four (40472) HDTV displays equipped with HDMI inputs. TruLink Splitters are designed to support 480i, 480P, 720P, 1080i and 1080P resolutions. This unit is cascadable up to three layers. Equalizer circuitry can transmit an HDMI signal to distances of up to 150ft between source and monitor.
FEATURES HDMI™ (v1.3 with Deep Color, x.v. color, high speed refresh rates and lossless multi-channel surround sound.
PACKAGE CONTENTS HDMI™ 1.
DEVICE OVERVIEW (40471) Display Output Indicator LEDs 40471 Front Power Indicator LED 40471 Rear Power Supply Input HDMI Input HDMI Outputs 5
DEVICE OVERVIEW (40472) Display Output Indicator LEDs Power Indicator LED 40472 Front 40472 Rear Power Supply Input HDMI Input HDMI Outputs 6
DEVICE INSTALLATION Step 1 Make sure that your HDMI enabled device and televisions/monitors are turned off. Step 2 Using an HDMI cable (not included), connect the HDMI output of your source device to the HDMI input on the rear panel of the HDMI splitter. Step 3 Using HDMI cables connect the HDMI Splitter outputs to the HDMI inputs on your televisions/monitors. NOTE: The maximum recommended HDMI cable length connecting the source device to the HDMI splitter is 10m.
DEVICE INSTALLATION 8
DEVICE INSTALLATION Step 4 Plug in the included 5VDC power adapter to the rear panel of the HDMI splitter, and connect the opposite end into a receptacle outlet. Step 5 Power on source device as well as your televisions/monitors. Step 6 Change your televisions/monitors to its HDMI input (please refer to your television/monitor owner’s manual if assistance is needed with changing inputs). Step 7 The LED output indicator will illuminate to show proper connection and “handshake”.
CASCADING THE SPLITTER The HDMI outputs on the rear panel of the splitter are capable of being split up to three levels. This can be referred to as cascading or daisy-chaining. With the two-way splitter, you can take one source device (DVD player, satellite or cable receiver, etc.) and split it so that you can connect up to eight televisions/monitors at the same time. With the four-way splitter, you can have your source device going to sixteen televisions/monitors by cascading or daisy-chaining.
CASCADING THE SPLITTER Example: Cascading 40471 Diagram 11
CASCADING THE SPLITTER NOTE: The resolution mode will depend on the first of the sequenced display devices that can successfully communicate with source device. The detect sequence of 40471 is from Port 1 to Port 2, and 40472 is from Port 1 to Port 4. Make sure your display devices can support the highest resolution as source device can support, and your display devices are HDCP compliant and fully support HDCP. This HDMI 1.3 Splitter will distribute one resolution at a time. If the HDMI 1.
TROUBLESHOOTING Problem No Operation No picture or signal; Poor picture. 1. Solution Verify the 5V power supply is connected to the selector. 2. Verify unit’s power is on by the power indicator Red LED. 1. Make sure your video display is HDCP compliant. 2. Make sure HDMI cable length is no longer than 10m from the source to the splitter and no longer than 15m from the splitter to your television/monitor. 3. Make sure all HDMI connectors are tightly secured to all HDMI ports.
TECHNICAL SPECIFICATIONS Product Number Output Ports Input Port Video Amplifier Bandwidth Operation pixel frequency range Single Link Range HDMI DDC Signal Input Video Signal HDMI Standard Product Dimension Product Weight Power Supply Input Power Supply Output 40471 40472 HDMI Type A HDMI Type 19-pin A 19-pin Female*2 Female *4 Gold plated connectors HDMI Type A 19-pin female 2.25 Gbps 25MHz~225MHz 1080P max. 5V p-p (TTL) 1.2V p-p Compliant with HDMI 1.3b 8 ¾”W x 2 ¾”D x 1 ¼”H 1 lb 100-240V~50/60Hz 0.
CABLES TO GO™ ONE YEAR WARRANTY At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com. Cables To Go 3555 Kettering Blvd. Moraine, OH 45439 1-800-506-9607 www.cablestogo.
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product.
17
For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website. www.cablestogo.com VER. 1.0.12.12.
