USER GUIDE HDMI® OVER CAT5E EXTENDER Model: 40477 1
TABLE OF CONTENTS Introduction................................................................................................................................................2 Features.....................................................................................................................................................3 Package Contents......................................................................................................................................4 Device Overview..........
INTRODUCTION Thank you for purchasing the TruLink® HDMI® over Cat5e Extender. This product is a robust solution that allows you to extend your HDMI signal up to 60 meters (200 feet) over two Cat5e Unshielded Twisted Pair (UTP) cables. This solution is ideal for applications where your HDMI monitor needs to be placed further than the average 10 meter HDMI cable limitation.
FEATURES Extend your digital video signal up to 60 meters (200 feet) Cat5e UTP cabling enables easy and cost effective in-wall installation Supports HDCP Video Bandwidth: 2.
PACKAGE CONTENTS TruLink HDMI over Cat5e Extender- Transmitter Unit TruLink HDMI over Cat5e Extender-Receiver Unit Mounting Brackets DC 5V 2.
DEVICE OVERVIEW HDMI Input HDMI Output Equalizer RJ 45 Ports RJ 45 Ports 5
DEVICE INSTALLATION Step 1 Make sure that your HDMI enabled device and televisions/monitors are turned off. Step 2 Using an HDMI cable (not included), connect the HDMI output of your source device to the HDMI input on the HDMI over Cat5e Transmitter unit. Step 3 Using an HDMI cable, connect the HDMI output of the HDMI over Cat5e Receiver unit to your display device.
DEVICE INSTALLATION Application Diagram Note: -If your video signal flickers or is not clear, adjust the Equalizer rotational switch to adjust the setting.
TROUBLESHOOTING Problem No Operation No picture or signal; Poor picture. 1. Possible Solution Verify the 5V power supply is connected to the selector. 1. Make sure your video display is HDCP compliant. 2. Make sure all HDMI connectors are tightly secured to all HDMI ports. 3. Adjust the Equalization switch that is located on the HDMI over Cat5e Receiver unit. 4. Turn all equipment power to off and then restore power.
TECHNICAL SPECIFICATIONS Product Number 40477 HDMI Type A 19-pin female on Receiver HDMI Type A 19-pin female on Transmitter 2 indication LEDs Output Ports Input Port RJ-45 Connector Video Amplifier Bandwidth Input TMDS signal Input DDC signal Product Dimension Product Weight Power Supply Input Power Supply Output 2.25 Gbps 1.2 volts (peak-to-peak) 5 volts (peak-to-peak) 2.75 x 2.6 x .98 in. .17 lb DC 5V 2.6A 100-240V~50/60Hz 0.
CABLES TO GO® ONE YEAR WARRANTY At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 1-800-506-9606 or www.cablestogo.com. Cables To Go 3555 Kettering Blvd. Moraine, OH 45439 1-800-506-9607 www.cablestogo.
IMPORTANT SAFETY INFORMATION ! Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. ! Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product.
For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website. www.cablestogo.com VER. 2.0.9.22.