User Manual

ManualsBrandsC2G ManualsComputers & AccessoriesFinisar FTLF8519P3BNL Compatible 1000Base-SX SFP Transceiver (MMF, 850nm, 550M, LC, DOM) TAA Compliant

FTLF8519P3BNL-LEG/

1.25Gbps!SFP!Transceiver!

Features/

•

Up!to!1.25Gb/s!data!links!

•

Duplex!LC!connector!

•

Hot-pluggable!SFP!footprint!

•

850nm!VCSEL!Laser!transmitter!

•

RoHS!compliant!and!Lead!Free!

•

Up!to!550m!on!50/125µm!MMF!

Up!to!500m!on!62.5/125µm!MMF!

•

Metal!enclosure!for!lower!EMI!

•

Single!+3.3V!power!supply!

•

Low!power!dissipation!<800mW!

•

Commercial!and!industrial!!

operating!temperature!optional!

•

SFP!MSA!SFF-8074i!Complaint!

•

Digital!diagnostic!compatible!with!SFF-847!Rev11.0!

Product/Description/

Legrand’s!FTLF8519P3BNL-LEG!Sm all!Form!Factor!Pluggable!(SFP)!transceivers!are!compatible!with!the!Small!

Form!Factor!Pluggable!Multi-Sourcing!Agreement!(MSA).!The!SFP!transceivers!are!high!performance,!cost!

effective!modules!supporting!dual!data-rate!of!1.25 Gb p s/1.0 6G bp s!an d!su pp ort!d istan ce!u p!to!5 50m!with!MM F.!!

Legrand’s!SFP!transceivers!are!RoHS!compliant!and!lead-free.!

Regulatory/Compliance/

• ESD!to!the!Electrical!PINs:!compatible!with!MIL-STD-883!Method!3015.!

• ESD!to!the!Duplex!LC!Receptacle:!compatible!with!IEC!61000-4-2.!

• Immu nity!comp a tib le !with!IEC!61 0 0 0-4-3.!

• EMI!compatible!with!FCC!Part!15!Class!B!EN55022!Class!B!(CISPR!22B)!VCCI!Class!B.!

• Laser!Eye!Safety!compatible!with!FDA!21CFR!1040.10!and!1040.11!EN60950,!EN!(IEC)!60825-1,2.!

• RoHs!compliant!with!2002/95/EC!4.1&4.2!2005/747/EC.!

Applications/

• 1000Base-SX!

• 1x!Fibre!Channel!

FTLF8519P3BNL-LEG!

FINISAR!1000BASE-SX!SFP!MMF!

850NM!550M!REACH!LC!DOM!

Summary of content (6 pages)

PAGE 1
FTLF8519P3BNL-LEG FINISAR 1000BASE-SX SFP MMF 850NM 550M REACH LC DOM FTLF8519P3BNL-LEG 1.25Gbps SFP Transceiver Features • Up to 1.25Gb/s data links • Duplex LC connector • Hot-pluggable SFP footprint • • • • 850nm VCSEL Laser transmitter RoHS compliant and Lead Free Up to 550m on 50/125µm MMF Up to 500m on 62.5/125µm MMF Metal enclosure for lower EMI • Single +3.
PAGE 2
Pin Descriptions Pin Symbol Name/Descriptions Ref. 1 VeeT Transmitter Ground (Common with Receiver Ground) 1 2 TX Fault Transmitter Fault. 3 TX Disable Transmitter Disable. Laser output disabled on high or open. 2 4 MOD DEF (2) Module Definition 2. Data line for Serial ID. 3 5 MOD_DEF (1) Module Definition 1. Clock line for Serial ID. 3 6 MOD_DEF (0) Module Definition 0. Grounded within the module. 3 7 Rate Select No connection required. 8 LOS Loss of Signal indication.
PAGE 3
Pin-out of connector Block on Host board Recommend Circuit Schematic Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Supply Voltage Vcc -0.5 4.
PAGE 4
Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Unit Power Supply Voltage Vcc 3.13 3.30 3.47 V Power Supply Current Icc 250 mA Case Operating Temperature – Commercial Tc 0 70 °C Case Operating Temperature – Industrial Ti -40 85 °C Data Rate (Gigabit Ethernet) 1.25 Gbps Data Rate (Fibre Channel) 1.063 Gbps 50/125µm MMF L 550 m Electrical Characteristics (TOP=25°C, Vcc=3.3V) Parameter Symbol Min. Typ. Max.
PAGE 5
Optical and Electrical Characteristics Parameter Symbol Min. Average Output Power PO -9 Optical Wavelength λ 830 Spectral Width Typ. Max. Unit Notes -4 dBm 1 860 nm σ 0.
PAGE 6
EEPROM Information EEPROM memory map specific data field description is as below: Digital Diagnostic Monitoring Interface Five transceiver parameter values are monitored. The following table defines the monitored parameter's accuracy. Parameter Temperature Range 0°C to 70°C (C) -40°C to 85°C (I) Accuracy Calibration ±3°C Internal Voltage 2.97V to 3.