Edition 9.
Contents Industrial label printers . . . . . . . . 3 . . . . . . . . Label printers A+ series - overview of types . . . . . . . . 4-5 Label printers with centered material positioning . . . . . . 6-7 Label printers with centered material positioning and drawing roller. 8-9 Label printers for two-color printing. . . . . . . . . . 10-11 Label printers - technical data. . . . . . . . . .
Industrial label printers Professional industrial cab label printers are used in a wide variety of applications. Their development is first and foremost focused on simple and convenient operation coupled with high reliability. Printing units and housings are made of high-quality materials and are perfectly matched in terms of shape and function. Extensive peripherals and software enable customized solutions – at any time.
Label printers A+ series - overview of types The sleek one For small labels with high printing accuracy A2+ 1.1 Label printer Printable resolution dpi Print width up to mm Print speed up to mm/s 300 54.2 150 600 57 100 The all-purpose one Top-selling industrial device with high printing accuracy. Extensive range of accessories included. The A4.3+ model preferably for thermal direct printing. A4+ A4.3+ 1.2 Label printer Printable resolution dpi 203 300 600 203 300 Print width up to mm 104 105.6 105.
Common details 1 2 3 6 7 8 4 5 Pictured: Label printer A4+ with dispensing function 1 Wide graphic display White backlight for optimum readability. 2 Ribbon holder Three-part tightening axles enable a quick and easy exchange of ribbons. 3 Simple adjustment The print head is pressed down by two toggles. One is mounted to the left label margin, the other is pushed to the right label margin. 4 Peripheral connection All add-on modules are easy to connect.
Label printers with centered material positioning For single-sided printing As with the “classic” A+ series all materials can be marked. Especially very small and slim labels and continuous material on rolls or reel. No adjustment of the print head for different widths of material. Operation and control are compatible with the A+ series. 1.5 Label printer Printable resolution dpi Print width up to mm Print speed up to mm/s A4+M 300 105.6 125 600 105.
Common details 2 7 1 Pictured: Label printer A4+M with centered material positioning 3 2 4 1 5 6 Pictured: Label printer XD4 for double-sided printing 1 Wide graphic display White backlight for optimum readability. 2 Ribbon holder Simple, centered insertion of the ribbon with three-part tightening axles. Imprinted rule simplifies ribbon positioning. 3 No print head adjustment The print head is pressed down by two toggles.
Label printers with centered material positioning and drawing roller For single-sided printing Printable materials accordant to A+M. The additional drive roller next to the print head enables the material to be separated from the ribbon and improves printing accuracy. Operation and control are compatible with the A+ series. 1.7 Label printer Printable resolution dpi Print width up to mm Print speed up to mm/s A4+T 300 105.6 125 600 105.
Common details 7 2 1 Pictured: Label printer A4+T with centered material positioning 3 2 4 1 5 6 Pictured: Label printer XD4T for double-sided printing 1 Wide graphic display White backlight for optimum readability. 2 Ribbon holder Simple, centered insertion of the ribbon with three-part tightening axles. Imprinted rule simplifies ribbon positioning. 3 No print head adjustment The print head is pressed down by two toggles.
Label printers for two-color printing Two in-line arranged thermal transfer print units for simultaneous two-color printing in one label. With ribbon saver at one print unit: • The XC series meets the conditions for the classification and labeling inventory according to GHS. • For large label rolls up to 300 mm diameter • The two print units including ribbon holder, operation panel and electronics are adopted from the proven A+ series. 1.
Common details 1 2 6 3 2 1 4 7 8 5 Pictured: Label printer XC6 for two-color printing 1 Wide graphic display White backlight for optimum readability. 5 Solid metal housing Die-cast aluminum. All components are mounted on it. 2 Ribbon holder Simple, centered insertion of the ribbon with three-part tightening axles. 6 3 Simple adjustment The print head is pressed down by toggles. One is mounted to the left label margin, the other is pushed to the right label margin.
Label printers - technical data Standard Optionally 1.1 Label printer A2+ Print head Printing method thermal transfer thermal direct – Printable resolution dpi 300 600 Print speed up to mm/s 150 100 Print width up to mm 54.2 57 Material Labels or continuous materials on rolls or fanfold Labels on reel – Material thickness mm/weight g/m2 Width labels2) mm 4-63 liner mm 24-67 continuous material mm 24-67 contin.
Standard Operation panel Buttons/LED displays Pause, feed, cancel, menu, enter, 4 x cursor LCD graphic display Width 60 mm, height 40 mm, 4 lines text, approx.
Accessories - overview Typical Possible Standard Optionally Extra equipment 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.1 3.2 3.3 3.4 4.1 4.2 5.1 5.2 5.3 5.4 5.5 Metal cover Print rollers DR4-M25, -M50, -M80 Reflective label sensor - from top Adapter 100 mm diameter Memory card Standard USB keyboard External operation panel Pause adapter PS7 - print job interruption Tester CC for linear and 2D barcodes Interfaces Centronics according to IEEE 1284 RS422/RS485 Label selection – I/O box WLAN 802.
Accessories - special equipment, interfaces, connecting cables Extra equipment 2.1 Metal cover On request, label printers A4+ and A6+ are available with metal cover (standard with the A8+). 2.2 Print roller DR4-M25 For small and thin materials up to 25 mm width Print roller DR4-M50 For very thin materials from 20 to 50 mm width Print roller DR4-M80 For very thin materials up to 80 mm width 2.3 Reflective label sensor From top 2.
Accessories - cutting labels, perforating labels, stacking labels 5.1 Cutter CU Used to cut paper labels, self-adhesive labels, cardboard, textile or synthetic materials as well as heat shrink tubes. Cutter tray Up to about 50 labels may be collected in the cutter tray. Cutter CU2 Usage 5.2 5.3 CU4 CU6 CU8 A4+M, A4+T A6+ A8+ XD4, XD4T, XC4 XC6 67 120 110 180 232 60-500 0.05-0.8 >5 2.
Accessories - rewinding labels, unwinding labels Rewind guide plate RG for internal rewinding Internal rewinding is done by dispensing printers. In this case, the peel-off plate is replaced by the rewind guide plate. 6.
Accessories - dispensing labels 1 Dispensing printers (“P” types) additionally need to have a peel-off adapter or present sensor. Different types for either manual operation, or via hand switch, foot switch or an external signal are available. 1 Dispensing labels 7.1 7.2 7.3 Peel-off adapter PS5 for automatic operation Printing and dispensing the label is triggered via external signal. The label is removed by an applicator or robot.
Accessories - for dispensing labels For peel-off adapter PS5, present sensor PS6, pause adapter PS7, For dispensing labels 8.1 8.2 8.3 8.4 8.5 9.1 dispensing modules A5104/A5106, applicator A1000, applicator A3200 Hand switch TR1 Printing and dispensing on demand Foot switch Printing and dispensing on demand Interface connector/Sub-D plug Sub-D plug 15-pin with screw clamps for PS5, PS6, PS7 and applicators. To connect external control signals.
Applicator A1000 Real-time application Combined with the A2+, A4+ and A6+ printers the A1000 applicator means a cost-effective solution - for both semi-automatic operation and integration into product lines. For operation compressed air of 4,5 bar is needed. 9.3 1 1 Long service life The ball-bearing guide bars are low-wearing. 2 2 Variable product heights The lifting cylinder allows labeling at different heights. Different stroke heights are available.
Accessories - Applicator A1000 9.4 Tamps Labels are applied on the tamp and held by vacuum. Tamp and label are then moved to the product by applicator. Universal tamp pad The rasterized vacuum holes are covered by a foil and are pierced according to the label size. Tamp pads are manufactured according to the label size.
Applicator A3200 9.8 4 5 3 2 6 1 7 8 Real-time application With the A3200 applicator labels that are printed with the A2+ or A4+ printers are automatically applied on a product. A rotary cylinder allows positioning the label between 45° and 95°. Finally, the label is placed on the product via short stroke cylinder. 1 Long service life The ball-bearing guides are low-wearing. 2 Variable angular position The rotary cylinder allows labeling on horizontal, inclined and vertical surfaces.
Accessories - mounting equipment Mounting foot (for A2+, A4+) For fastening the print and apply system and product holder. 10.1 1 Mounting plate The print and apply system is fastened on the mounting plate. 2 Profile Standard lengths 40, 80, 120 mm. The aluminum square profile can also be manufactured in other lengths upon request. 3 Base plate For fastening the product holder Standard size 500x255 mm 10.2 10.
Label software cablabel S3 cablabel S3 concentrates label design, print control and monitoring of all cab marking systems. The development of devices and software is synchronized. Highlights Like no other software available cablabel S3 develops the full potential of cab devices. The software utilizes the JScript code to the full extent. The Pro product imports existing JScript files, so you can switch over easily to new software.
Integration No printer works isolated. In a productive environment it is connected to other equipment or networks for control and monitoring. cab offers various possibilities to integrate the printer into your business environment. Control Every cab printer can be directly coded with the simple programming language JScript and an extensive instruction set. Direct programming is supported by cablabel S3, but may also be created with any text editor.
Stand-alone operation Printing without PC Stand-alone operation is the ability of cab printers to print labels even if these devices are not connected to the host system. The layout is designed with a special label software or direct programming via PC. Label formats, fonts, text and graphics data as well as database contents are saved or read on the CompactFlash memory card, USB stick or internal IFFS printer memory. Only variable data to be printed is sent to the printer via keyboard or host.
Service Well-trained cab service engineers give worldwide support in maintenance and repair. Please send your printer to one of cab's service centres or one of our selected service partners. We will check and repair your printer within a few days. If requested, we will make a temporary equivalent device available for the time of repair. Training We offer information on the programming of different software tools, printer drivers and label layout design.
Label printers - product range Part no. Printers dpi Part no. Print heads dpi 5954511 5954512 Label printer A2+ Label printer A2+ 300 300P 5954105.001 Print head 2 300 5954575 5954578 Label printer A2+ Label printer A2+ 600 600P 5958686.001 Print head 2 600 5954500 5954505 Label printer A4+ Label printer A4+ 200 200P 5954081.001 Print head 4 203 5954501 5954506 Label printer A4+ Label printer A4+ 300 300P 5954072.
Accessories - product range Part no. Special equipment Part no. Rewinding labels, unwinding labels 5954012.001 5954013.001 Metal cover for A4+ Metal cover for A6+ 5954108.001 Rewind guide plate RG2 for internal rewinding 5954190.001 5953700.001 Print roller DR4-M25 Rewind guide plate RG4 for internal rewinding 5953701.001 Print roller DR4-M50 5953702.001 Print roller DR4-M80 6.2 5948102 5943251 5945802 External rewinder ER1/210 External rewinder ER2/210 External rewinder ER3/210 2.
Accessories - product range Part no. Applicators and dispensing modules 9.1 5949281 5949265 Dispensing module A5104 Dispensing module A5106 9.2 5941345 All-around labeler Part no. Mounting equipment 5969811 5958367 Mounting plate for A2+ Mounting plate for A4+ 5958365 5965929 5971136 Profile 40 Profile 80 Profile 120 5xxxxxx** Profile L 10.3 5961203 Base plate 500x255 10.4 5947400 Floor stand 1600 10.
cab product range at a glance Label printer EOS1 The compact one for label rolls up to 155 mm diameter Label printer EOS4 The cost-effective one for label rolls up to 210 mm diameter Label printer EOS mobile Both EOS sizes with battery pack for mobile print Label printers A+ series The universal ones Label printer A4+M With centered material positioning Label printer A4+T With centered material positioning also for textile materials Label printers XD4, XD4T Double-sided printing Label printers XC ser
1 2 Headquarter and fabrication in Germany to 7 International subsidiaries There are furthermore 820 distribution partners in more than 80 countries. 1 2 3 6 4 5 7 Germany cab Produkttechnik GmbH & Co KG Wilhelm-Schickard-Str. 14 76131 Karlsruhe phone +49 721 6626 0 fax +49 721 6626 129 info@cab.de www.cab.de France cab Technologies S.à.r.l. 2a Rue de la Moder Z.A. Nord du Val de Moder 67350 Niedermodern phone +33 388 722501 fax +33 388 722502 info.fr@cab.de www.cab.
