Technical data

4
1
2
6
7 9 5 8
3
4
4
Details
4
1
5
2
6
7
8
3
Touchscreen – LCD display
Clearly designed for highest ease of use.
Three USB interfaces
2 USB interfaces on the operation panel,
1 USB interface on the back side for memory
stick, keyboard, scanner, WLAN or Bluetooth.
Roll holder
The label roll is inserted and centered
automatically when closing the cover.
Ribbon retainer
The stop is adjustable to the ribbon width.
Gap or reflective label sensor
The sensor position is adjustable by the
red knob via a spindle. The set position is
displayed with a LED.
Label guide
The guides are adjusted to the material
width with the green knob.
Printhead
The printhead can be easily removed
by hand for cleaning or replacement.
Print roller
For cleaning or replacement the print roller
can be removed without tools.
Tear-off edge
Tear-off edge made out of steel
sheet with sawtooth to ensure a
perfect tear-off.
Cutter
The cutter is used to precisely cut
all printable materials. An
additional perforation and cutter,
e.g. for heat shrink tubes, is
available on demand.
Dispensing module
The liner is led out underneath the
peel-off plate and can be torn off
as required. The additionally built-
in motor-drive for the liner ensures
dispensing with highest reliability.