Owner`s manual

english
■ PHASE: usually it is necessary to position the potentiometer
on 0°, however 2 positions can be used 0° and 180 °.
- adjust the potentiometer on 0° when the subwoofer and the
front speakers are positioned at the same distance of the lis-
tening area.
- adjust the potentiometer on 180° when the subwoofer is
positioned 5 ft (1.5m) ahead or behind the front speakers.
SETTING YOUR AV AMPLIFIER 8
The table below shows the adjustments to make.
SETTING YOUR AV AMPLIFIER WHEN FITTED
WITH AN ADJUSTABLE SUBWOOFER LOW PASS
CROSSOVER POINT (FROM 80 TO 200 HZ)
In this case, you don’t need to use the MAX, adjust the sub-
woofer low pass crossover point of your AV amplifier at 200 Hz,
then adjust the set-up of your AV amplifier:
TROUBLESHOOTING
If you have a problem with your XO
2
SYSTEM, turn off your
sound source and try the solutions below. If you still have a
problem, contact your Cabasse dealer to arrange for service.
CLEANING THE SPEAKERS
The cabinets of XO
2
speakers may be cleaned with a soft damp
cloth. Do not use any sprays near the system or allow liquids
to spill into any openings. Also, do not use any solvents, chem-
icals, or cleaning solutions containing alcohol, ammonia, or
abrasives.
The grill assemblies on the speakers may be carefully vacu-
umed, if necessary. Please note that the drivers are located
directly behind the grille cloth, and are easily damaged if rea-
sonable care is not taken.
AFTER SALE SERVICE
Cabasse retailers’ network is at your disposal to ensure the
after sale service of your material. To get the list of Cabasse
retailers, contact us or consult our web site
www.cabasse.com.
Problems Solutions
The system does not • Make sure the amplifier
function at all and the subwoofer plugged into
an operating AC wall outlet
and that the subwoofer is turned
ON or AUTO.
• Be sure that the right source is
selected on the amplifier
(video, CD, DVD, tuner…).
• Check the speaker connections.
•Turn the subwoofer
on ON or AUTO.
•For digital sound, be sure a coaxial
or optical cable connects the digital
output of the DVD player with
the digital input of your amplifier.
Not enough or • Move the subwoofer closer to
too much bass a wall or a corner to increase very
low bass frequencies.
• Move it farther away from a wall
or a corner to decrease very low
bass frequencies.
• Adjust the LFE level control of your
AV amplifier
No surround sound • Check that the adjustments of your
AV amplifier are correct
SpeakersAV amplifier
adjusting
FRONT LEFT LARGE
FRONT RIGHT LARGE
CENTRE LARGE
SURROUND LEFT LARGE
SURROUND RIGHT LARGE
SUBWOOFER/LFE ON
SpeakersAV amplifier
adjusting
FRONT LEFT SMALL
FRONT RIGHT SMALL
CENTRE SMALL
SURROUND LEFT SMALL
SURROUND RIGHT SMALL
SUBWOOFER/LFE ON
Thanks to the above information, your XO
2
SYSTEM is now nicely set up and we hope you will enjoy your speaker system for many years. We recei-
ve every day letters from customers expressing the ever growing satisfaction and musical emotion they have been getting with our speakers over the
years. These letters are our first motivation.
Cab notice Xo2-06 7/07/05 9:40 Page 11