400-1139-1.
400-1139-1.qxp:two column layout for print 4:03 PM Page 2 Quick Start Guide FIRST THINGS FIRST You will need to charge your Gun Dog® Transmitter and Collar Receiver before you can use them. While your Gun Dog® Transmitter and Collar Receiver are charging, read this manual to become familiar with the devices.
400-1139-1.qxp:two column layout for print 9/25/09 4:03 PM Page 4 Quick Start Guide Step 2 THE TRANSMITTER Turning the Collar Receiver ON and OFF Quick Start Guide To Turn the Collar Receiver ON: Press and release the On/Off Button when the Collar Receiver Indicator Light comes on. The Collar Receiver will emit a start up tone.
00-1139-1.qxp:two column layout for print Explaining the Transmitter Keypad Buttons (continued) Prog/Loc (GS-7001 only) – Pressing and holding this dual-function button until the PROG symbol appears in the display puts the Transmitter in programming mode. Briefly pressing this button starts or stops Locate Mode (explained on page 10). Locate (GS-6001 only) – Press this button to start or stop Locate mode (explained on page 10).
400-1139-1.qxp:two column layout for print continued from previous page To use Dual Dog mode: 1. Turn on Collar Receiver 1. 2. Set the desired Dog 1 stim level with the UP and DOWN arrow keys. 3. Press Dog Select button to switch to Dog 2. 4. Turn on Collar Receiver 2. 5. Set the desired Dog 2 stim level with the UP and DOWN arrow keys. 6. Press the Prog/Loc button until the PROG symbol displays, then release the button. 7.
400-1139-1.qxp:two column layout for print 9/25/09 4:03 PM Page 10 CABELA’S EXCLUSIVE! TRANSMITTER LOCATOR THE COLLAR RECEIVER At Cabela’s, we listen to bird hunters, gun dog owners, and our customer feedback. This feedback provides us with a huge source of information about remote training systems and desired features. You’ve made an investment in this deluxe remote training system, so we decided to develop a method for locating your transmitter, should it become lost while in the field.
400-1139-1.qxp:two column layout for print Match the Collar Receiver and Remote Transmitter To reset the Collar Receiver to work with a new Remote Transmitter or to reprogram a new Collar Receiver to work with your existing Remote Transmitter: 1. Turn the Collar Receiver off 2. Press and hold the On/Off Button. The Collar Receiver Indicator Light will come on, then turn off after 5-6 seconds. If the On/Off Button is released too early, the Collar Receiver Indicator Light will begin flashing as normal.
400-1139-1.qxp:two column layout for print 9/25/09 4:03 PM Page 14 Training Tips • We recommend your dog be at least six months old before starting a remote training system program. • Always praise your dog for good behavior! • Teach him what the commands mean before introducing the Collar Receiver as a reinforcement tool. • Keep training sessions brief, about ten minutes of training and then a rest or play period of at least equal length. • Dogs learn through repetition.
400-1139-1.qxp:two column layout for print TROUBLESHOOTING If the Transmitter and Collar Receiver appear to be not working, try the following: • Adjust the collar strap to fit better. • Test the Collar Receiver using the Test Light. If no light, recharge the Collar Receiver’s battery. • If the Transmitter display is off, first try pressing any button. If the display remains off, recharge the Transmitter. • Carefully turn on the components as shown in the Quick Start Guide (beginning of this manual).
400-1139-1.
400-1139-1.
400-1139-1.
400-1139-1.