Manualshelf

User Manual

ManualsBrandsCable Matters ManualsComputer Accessories & PeripheralsHDMI Extender Balun - Wall Mount HDMI Over Ethernet Extender with TCP/IP Support for 1-to-Many Setup 1080p 60Hz up to 328 Feet (100m) - Support Local Monitor Loop-Out
12345678910
6
A/V Extender over Cat6 with TCP/IP Configuration and IR Control
www.cablematters.com
NOTE:
• Refer to the user manual of your monitor, TV, or projector for changing the resolution
and sound input settings and verifying that audio is supported.
• Test each new Receiver box directly with the original Transmitter box before connect-
ing with a network switch and installing permanently.
8. Plug the power adapters of the Transmitter and Receiver into an AC outlet (look for a blue
LED)
9. Turn on the power to the source equipment and connected display and wait a few seconds
for the signal to synchronize. Check that the blue LED is lit.