User Manual

14
Torque Wrenches
Prevent damage to
equipment from over
tightening or signal loss
due to loose connectors.
End caps are color coded for
easy identification of different
torque settings. Knurled tool body
ensures a firm hold during use.
Matching End Cap Colors to Torque Requirements
End Cap Color Torque Setting
Blue 12 inch pounds
Yellow 20 inch pounds
Orange 25 inch pounds
Green 30 inch pounds
Black 40 inch pounds
To Assemble Connector
1. Place the connector on the tap port and hand
tighten.
2. Position the torque wrench on the connector and
rotate wrench clockwise. Turn until you hear and
feel the “click” in the handle, indicating that you
have reached the desired torque.
NOTE: do not over-tighten beyond the “click”
otherwise you risk causing damage to the
connector or the wrench
To Remove Connector
1. Position the torque wrench on the connector and
rotate counter-clockwise until the connector
loosens.
Drop Tool Instrux 1.16 2/2/16 2:49 PM Page 14