User Guide

CC0673-CC0675 User’s guide

1,Bofore you are going to use this cable, please make sure you have a

smart phone with Micro USB port or type-c port, your phones should

support OTG function.You can contact with your phone's manufacture

for more supports about if your phone supports OTG or not. Or you can

go to your phone's settings and check if you have enabled the OTG

function, sometimes you probably need to turn on the USB debugging

function on the developer option. It differs with different phones.

2, If you have purchased the cable from CableCreation, you can use the

following steps to confirm if your phone supports OTG or not.

2.1 Prepare a USB wired mouse

2.2 If you have a smart phone with Micro USB port, plug the micro

USB to your phone, and hook your USB wired mouse to the USB female

port, and move your mouse, your cursor should appear on your phone'

s desktop.

If you have a smart phone with Type-C port, combine the micro USB

port and Type-C part together as follows,

PAGE 1
CC0673-CC0675 User’s guide 1,Bofore you are going to use this cable, please make sure you have a smart phone with Micro USB port or type-c port, your phones should support OTG function.You can contact with your phone's manufacture for more supports about if your phone supports OTG or not. Or you can go to your phone's settings and check if you have enabled the OTG function, sometimes you probably need to turn on the USB debugging function on the developer option. It differs with different phones.
PAGE 2
then plug your USB mouse on the USB female port to check if your phone/tablet support OTG or not. 3, If you have confirmed your phone/tablet supports OTG function, just hook your USB flash driver or keyboard on the USB A female port. Your flash driver's format should use Fat32 file system. If you used other file system, like NTFS, your phone would not detect your flash driver, pleas e format your flash drive with Fat32 file system on your PC in advance.