User Guide

http://www.cablecreation.com
Problems
Troubleshooting
How to download and install
the drivers for your computer?
MacOS X and macOS.
1, Visit the correct link to download the driver
http://www.displaylink.com/downloads/macos
2, Use your “Admin” account to install the driver.
You have to go to left-upper apple icon

System
Preferences

Security & Privacy

General

Allow
apps downloaded from App Store and identified
developers. There would be a popping message
referring to ”System software from
developer ’DisplayLink Corp’ was blocked from
loading ” You should click ”Allow” icon on the right
side. This step is rather important. Please do it in
30 minutes
You can also refer this link for more details.
https://support.displaylink.com/knowledgebase/a
rticles/1188004
Note: If you did not click “Allow” icon, and your
Mac would not install the driver correctly.
You can Go to Finder

Applications

Displaylink
folder

Uninstall the driver, and reboot your
Mac.Then reinstall the driver, remember to click
“Allow” icon.
3, Restart your Mac.
4, Set the corresponding HDMI port as your
TV/monitor/projector’s input source.
5, If you need to mirror or extend your Mac’s
desktop, you can just go to left-upper apple
icon

System Preferences

Displays to set mirror
displays or not.
Note: If the driver is not installed incorrectly or
you need to re-install the driver, please go
Launchpad--Applications--DisplayLink folder, firstly
uninstalled the previous driver. Reboot your Mac.
Then follow above steps again.