User Guide

http://www.cablecreation.com
Windows
1, Visit the correct link
http://www.displaylink.com/downloads/windows
2, Download and install the driver with your
“Administrator” account, you can also visit your
PC or laptop’s official website, update the USB 3.0
host controller to the latest version.
3, Restart your laptop or PC
4, Set the corresponding HDMI port as the input
source. Make the connection stable and secure.
5, If your desktop just uses this adapter as an
independent monitor, when you start your PC,
please be more patient, since the adapter would
work until you see the log in Windows, your HDMI
monitor would not show anything when you just
push the start button on your desktop.
Note: If the driver is not installed incorrectly, then
go Control Panel-->Uninstall a program, find
DisplayLink options, then reboot your Windows.
then use your Administrator permission account
to install the driver to have a try.
Driver Installation video
https://www.youtube.com/watch?v=T14ZbReJoeI
&feature=youtu.be
My HDMI monitor does not
output any video or signal.
You need to download and install the
corresponding drivers.
When you update OS/windows
and the Adapter doesn’t work.
You need to uninstall the previous drivers and
re-install corresponding drivers.
My HDMI monitor or Display
or projector works
intermittently or stuck.
1, Check your HDMI cable’s quality, please make
sure you have used a quality HDMI cable. If
possible, you can also swap another HDMI cable
2, Check if the connection stable and securely.
When you were using this adapter, do not move
your laptop or cables. If you have to move your
laptop, after your behavior, please keep the
connection stable.