User`s guide

32 How to Set Up the Print Server

R4CB110

User’s Guide Rev.C

Start.fm A5 size

8/21/03

Proof Sign-off:

KOW M. Arai H. Tomizawa

K. Nishi

NOC K. Lee

Note:

Be sure to initialize the print server when you install or reinstall the

print server.

4. Turn off the printer.

5. Connect an Ethernet cable (Category 5 shielded twisted-pair

cable) to the RJ-45 connector on the print server, and then

connect its other end to the network.

Caution:

❏ You must use a Category 5 shielded twisted-pair cable to

connect the print server to prevent malfunction.

❏ Do not connect or disconnect the network cable when the

printer is on.

❏ Do not connect the print server and the computer

directly. Be sure to use a HUB to connect the print server

to the network.

Note:

You can use both 10Base-T and 100Base-TX. If you print a lot of

data, we recommend that you use a high-speed network of

100Base-TX with a light network traffic.

6. Turn on the printer.

Press the status sheet button

more than 20 seconds.