4-Port USB SuperBooster Receiver Dongle Part #29347 User Manual
Introduction Thank you for purchasing the USB SuperBooster Receiver Dongle. The USB SuperBooster Receiver Dongle is one component of a complete solution that, when paired with a transmitter (sold separately) allows you to conquer USB length limitations and put your USB devices where you need them.
Features • • • • • • • • • Extends the distance of a USB device from a USB-enabled computer up to 150ft One part of a total solution- transmitter is purchased separately giving you the flexibility to customize the configuration to your specific needs Transmitter options include a wall plate (part #29344) or a dongle (part #29348) Ideal for use with USB projectors, interactive whiteboards, cameras, printers, web cams, hubs, and other USB devices Bus-powered so no external power source is required Uses stand
Installing your USB SuperBooster Dongle The USB SuperBooster solution has a transmitter unit (sold separately) and a receiver unit. Make certain you install the transmitter unit at your computer or source side. The receiver unit needs to be installed on the device side.
Termination Chart Pin Number 1 2 3 4 5 6 7 8 Network (Cat5/5E/6) Conductor Color white/orange orange White/green Blue White/blue Green White/brown brown Application Diagram Transmitter Receiver 3555 Kettering Blvd. Moraine, Ohio 45439 1-800-293-4970 www.cablestogo.