Network Card User Manual

Figure: Pin Association Entry

PIN ASSOCIATION

For Pin Association, it is strongly recommended that you use a TruLink Wireless USB Host Adapter, as

some other Wireless USB host adapters may not support the feature. To pin associate with the TruLink

Wireless USB Host Adapter, please do the following:

1. Make sure the Wireless AV Adapter Wireless/Wired switch is on Wireless.

2. Open the Wireless USB Manager, and click the Discovery button. The host adapter will look for the

Wireless AV Adapter.

3. Once the Wireless AV Adapter is located, you will get the PIN

Association dialog box that prompts you to enter the PIN of the

device. The default PIN of the TruLink Wireless AV Adapter is

1234. This number may be changed and the procedure is

described in the Appendix section of this guide. Enter the PIN

and then click the Accept Association button.

The necessary Wireless AV Adapter drivers will install

automatically. The VGA Activity Indicator will light on, and you

are now ready to use the adapter

SOFTWARE/DEVICE INSTALLATION