® USER GUIDE TRULINK® 4-PORT VGA AND USB 2.
TABLE OF CONTENTS ÍNDICE TABLE DES MATIERES Introduction ..................................................................... 2 Features.......................................................................... 3 System Requirements .................................................... 4 Package Contents .......................................................... 5 Device Overview............................................................. 6 Device Installation............................................
INTRODUCTION ® ® Thank you for purchasing the TruLink VGA and USB 2.0/PS2 KVM with Audio by Cables To Go! This TruLink KVM switch allows you to control up to four computers with a single keyboard, mouse, and monitor, as well as a single set of speakers or microphone if desired. For added convenience, this KVM switch works with both USB ® and PS2 mice and keyboards. The TruLink VGA and USB 2.0/PS2 KVM with Audio also features a 3-port USB 2.
FEATURES CARACTERÍSTICAS FONCTIONS Controls 4 computers from a single console over VGA and USB connections, using standard VGA and USB cables. Supports PS/2 or USB keyboard/mouse. Compliant with USB Specification Revision 2.0 and USB Device Class Definition for HID Revision 1.11. Includes a three port USB 2.0 to share USB devices.
SYSTEM REQUIREMENTS REQUISITOS DEL SISTEMA Computer with one available USB port and VGA port (if you wish to share speakers and/or microphone, computer must also have available audio ports) ®, Windows 98, ME, 2000, XP Vista, Windows 7 or later, ® Mac OS9/OSX, Solaris 8 (SUN BLADE 100), Linux Kernel 2.3+.
PACKAGE CONTENTS CONTENIDO DEL PAQUETE 4-Port VGA and USB 2.0 PS/2 KVM with Audio CD With User’s manual and On-Screen-Display (OSD) Software Four 1.8 m VGA & USB cables Four 1.8 m 3.
DEVICE OVERVIEW / DESCRIPCIÓN GENERAL DEL DISPOSITIVO / VUE GENERALE DE L’APPAREIL / 6
DEVICE INSTALLATION Note: Be sure that all computers and the monitor are turned off before making connections to the KVM. Step 1: Plug the power adapter into the KVM and then into an AC wall outlet. Step 2: Connect the USB cable Type-A end to an available USB port on your computer, and the USB cable Type-B end to the any available port on the KVM.
DEVICE INSTALLATION APPLICATION DIAGRAMS 8
DEVICE OPERATION Switching the TruLink VGA and USB 2.0/PS2 KVM with Audio The TruLink VGA and USB 2.0/PS2 KVM with Audio supports three methods for PC selection: Front panel push buttons, PS/2 Keyboard Hot Keys, and the OSD software utility. Due to the refresh of the video and re-synchronization of the mouse and keyboard signals, it can take up to 3 seconds before control is re-established after switching. This is the normal operation to ensure proper signal synchronization.
DEVICE OPERATION Manual Switch by Push-button: You can switch to any other available active PC connection by simply pushing the appropriate switch button on the KVM. The red LED will be lit to indicate which port is currently selected. Two Step Hot Key Switch (PS/2 keyboard ONLY): You can switch to any available PC by entering a two step Hot Keys sequence directly from the PS/2 keyboard. Use the following steps. Step 1: Press the [Scroll Lock] key twice.
DEVICE OPERATION Hub-Switch Function: When the Hub-Switch mode is active, the KVM will tie the PC, built-in USB hub, and audio together allowing them to switch simultaneously. Using this method, the USB Hub and audio always switch to the active PC. This is required in order to use a USB keyboard and mouse. FUNCIONAMIENTO DEL DISPOSITIVO The Hub-Switch can be activated by pressing and holding any of the PC Buttons on the front of the KVM for 4 seconds.
FCC STATEMENT FCC Statement This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of the FCC Rules. These specifications are designed to provide reasonable protection against such interference in a residential installation.
TECHNICAL SPECIFICATIONS / SPECIFICHE TECNICHE / CARACTERISTIQUES TECHNIQUES / Product Number Number of Computers Controlled Selection Method LEDs Compliant with USB Version Compliant with HID Version PC Connectors Console Port USB Hub (Downstream Ports) Maximum Resolution Number of Cables Included Cable Length Power Adapter Dimensions Weight 35566 4 Push Button/Hot Key/OSD Active PC Indicator (Red) Hub Position Indicator (Green) Hub-Switch/Auto-Scan LED (Green) USB 1.1 & USB 2.0 USB HID 1.1/2.
CABLES TO GO® ONE YEAR WARRANTY / UN AÑO DE GARANTÍA CABLES TO GO® / GARANTIE D'UN AN DE CABLES T O G O® At Cables To Go, we want you to be totally confident in your purchase. That is why we offer a one year warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 800-506-9607 or www.cablestogo.
IMPORTANT SAFETY INFORMATION INFORMACIÓN DE SEGURIDAD IMPORTANTE INFORMATIONS DE SECURITE IMPORTANTES Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit. Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc.
For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website. Para obtener más información sobre este producto o para comprobar controladores actualizados, manuales o preguntas frecuentes, visite nuestro sitio web. Pour plus d'informations concernant ce produit ou pour rechercher des pilotes actualisés, des manuels ou des questions souvent posées, veuillez visiter notre site web. www.cablestogo.com VER. 2.1.07.09.
