User manual

Configuring Your Gateway

SMCD3GN2 Wireless Cable Modem User Manual

The bottom right side of the screen contains three buttons:

y Help displays online help

y Apply click this button to save your configuration changes to the displayed page

y Cancel click this button to discard any configuration changes made to the current page

Web Management Interface Menus and Submenus

Table 3 describes the menus and submenus in the Web management interface.

Table 3. Web Management Interface Menus and Submenus

Note: Some menus and submenus described in this chapter may not apply to your

Gateway. Please check your Gateway’s GUI to see which items are available.

Menu and Submenus Description See Page

System Lets you enable or disable uPnP and HNAP. The submenu lets you:

System > Password Settings

• Define the password for logging in to the Gateway’s Web interface.

LAN Lets you configure settings for your private LAN.

LAN > Ether Switch Control

• Specify fixed speed and duplex settings, and disable individual LAN ports.

LAN > Ether Access Control

• Allow all EtherLAN client stations to access the Internet through the Gateway,

allow certain trusted EtherLAN client stations to access the Internet through the

Gateway, or deny certain trusted EtherLAN client stations from accessing the

Internet through the Gateway.

QoS Lets you enable Quality of Service (QoS) settings. If you enable QoS, the following

submenus become available for:

QoS > Port

• Prioritizing performance of the four Gateway LAN ports.

QoS > COS

• Defining four queues to which the Class of Service (CoS) is mapped.

QoS > DSCP

• Defining the QoS class queue to which the customized DSCP is mapped.

QoS > Queue

• Specifying whether QoS behavior runs with strict or weighted priority.

QoS > DSCP Remarking

• Defining the DSCP remarking action and mode.

Wireless Lets you configure basic wireless settings, such as enabling or disabling wireless

operation, selecting wireless mode, and configuring the Service Set Identifier

(SSID) and channel settings. Submenus let you:

Wireless > Encryption

• Use encryption to protect the data transmitted across your wireless network

Wireless > WPS

• Enable or disable Wi-Fi Protected Setup (WPS).

Wireless > MAC Filtering

• Allow all wireless client stations or only trusted PCs to connect over a wireless

connection.

Wireless > Advanced Settings

• Configure advanced wireless settings for the Gateway.