User manual

Configuring Your Gateway
42
SMCD3GN2 Wireless Cable Modem User Manual
Controlling LAN Access
By default, All EtherLAN LAN stations is selected at the top of the menu. This setting
allows all client stations to access the Internet through the Gateway. To restrict LAN access,
click one of the following radio buttons and click Apply:
y Trusted PC List = restricts Internet access through the Gateway to client stations in the
Lan Trusted Table. To add client station to this table, see “Adding and Deleting Trusted
Client Stations”, below.
y Untrusted PC list = prevents client stations in the Lan Untrusted Table from accessing
the Internet through the Gateway. To add client stations to this table, see “Adding and
Deleting Untrusted Client Stations” on page 43.
Adding and Deleting Trusted Client Stations
To restrict Internet access through the Gateway to certain trusted EtherLAN client stations,
define the client stations as trusted clients. Using this procedure you can define up to 16
trusted client stations.
1. Click Trusted PC list at the top of the menu.
2. To add client stations that the Gateway automatically learned on the network, perform the
following steps under Auto-Learned Lan Devices:
a. Click a client station that the Gateway learned automatically.
b. Under Trusted?, click Y.
c. Click Add. The client station is added to the Lan Trusted Table.
d. To add more auto-learned client stations (up to 16), repeat steps 2a through 2c.
3. To manually add trusted client stations, perform the following steps under Manually-
Added Lan Devices:
a. Under Device Name, enter a name for the device.
b. Under MAC Address, enter the MAC address of the device.
c. Under Trusted?, click Y.
d. Click Add to add the client station to the Lan Trusted Table.
e. To manually add more client stations (up to 16), repeat steps 3a through 3d.