Specifications

----------------- Introduction
Overview
The MyHopper KMH2 and KMH4 are computer switches
that allows access to two or four IBM compatible
computers respectively from one PS/2 keyboard, mouse
and monitor. Switching between computers is as easy
as pressing the push button or entering hot-key
commands from your keyboard. There is no interface
card and software to install and the MyHopper is
independent of the computer operating system.
Ready to run right out of the box, this Kit comes with
everything you need - a switch and complete cable sets,
just hook them up and go. By allowing one console to
manage all your computers, the MyHopper eliminates the
expense for extra consoles, the spaces for extra
peripherals and the time hopping around for accessing
different computers.
2
Features
Unique loose-free cables included preventing
keyboard or mouse connector from getting loose.
Supports PS/2 keyboard and mouse.
Keyboard and mouse emulation for error-free PC boot
up.
Keyboard and mouse are hot pluggable at any time
without turning either MyHopper or PCs off.
Space-saving design - all cables are connected to the
rear.
Auto scan automatically selects computers
sequentially.
Supports M/S IntelliMouse (Pro), Explorer, Optical.
Hot-key and push button allow easy computer
access.
Keyboard states automatically saved and restored
when switching computers.
Operating system independent, transparent to all
applications.
High VGA resolution 1920x1440.
DDC2B compatible.
Power-free operation - the MyHopper draws power
from the attached PCs.
1