Specifications

Computers Connection

MyHopper comes with complete cable sets facilitating

computer connection. One side of the cable has an

HDB-15 connector and the other side has three

connectors (one HDB-15 and two mini-DIN6s). The PC

1 ~ PC 4 marks on the MyHopper are for computer

connection as shown in figure 3.

Figure 3: COMPUTER Connection

NOTE: If your computer uses an AT style keyboard, you

will need an "AT-to-PS/2 keyboard adapter" at the

computer keyboard port.

VGA

ort

Initial Power-up

Make sure all computers and the MyHopper are

powered down during installation. You may power

up the computers after installation,. The MyHopper

can be powered from the computers. This

procedure ensures the MyHopper receive computer

settings correctly when computer boots.

NOTE: You may hot plug any additional powered-down

computer to the MyHopper at any time after the initial

power up.