User`s guide

Contents
6H128-08 and 6H129-08 User’s Guide ix
5.15 General Configuration Screen................................................... 5-40
5.15.1 Setting the IP Address .................................................. 5-44
5.15.2 Setting the Subnet Mask............................................... 5-46
5.15.3 Setting the Default Gateway ......................................... 5-46
5.15.4 Setting the TFTP Gateway IP Address......................... 5-47
5.15.5 Setting the Module Date ............................................... 5-48
5.15.6 Setting the Module Time............................................... 5-48
5.15.7 Entering a New Screen Refresh Time .......................... 5-49
5.15.8 Setting the Screen Lockout Time.................................. 5-50
5.15.9 Setting the Operational Mode ....................................... 5-50
5.15.10 Setting the Management Mode..................................... 5-51
5.15.11 Configuring the COM Port ............................................ 5-52
5.15.11.1 Changing the Com Port Application ............. 5-54
5.15.12 Clearing NVRAM .......................................................... 5-55
5.15.13 Enabling/Disabling IP Fragmentation ........................... 5-56
5.16 SNMP Community Names Screen ............................................ 5-56
5.16.1 Establishing Community Names................................... 5-58
5.17 SNMP Traps Screen.................................................................. 5-60
5.17.1 Configuring the Trap Table ........................................... 5-61
5.18 Switch Configuration Screen ..................................................... 5-62
5.18.1 Setting the STA............................................................. 5-65
5.18.2 Setting the Age Time .................................................... 5-65
5.18.3 Setting (Enabling or Disabling) the Port Status ............ 5-66
5.19 Ethernet Interface Configuration................................................ 5-66
5.19.1 Configuring an FE-100FX/F3 Interface or a Port 7
or 8 FE-100FX/F3 Interface .......................................... 5-69
5.19.2 Configuring an FE-100TX Interface .............................. 5-70
5.19.3 Setting the FE-100TX Operational Mode...................... 5-70
5.19.4 Setting the FE-100TX Advertised Ability....................... 5-70
5.20 Module Specific Configuration Menu......................................... 5-71
5.21 System Resources Screen........................................................ 5-72
5.21.1 Setting the Reset Peak Utilization ................................ 5-74
5.22 Flash Download Screen ............................................................ 5-74
5.22.1 Image File Download Using TFTP................................ 5-76
5.22.2 Image File Download Using RUNTIME ........................ 5-77
5.22.3 Image File Download Using BootP ............................... 5-78
5.23 Port Redirect Function Screen .................................................. 5-79
5.23.1 Displaying the Source and Destination Entries............. 5-81
5.23.2 Changing Source and Destination Ports....................... 5-81
5.24 Broadcast Suppression Screen................................................. 5-82
5.24.1 Setting the Threshold.................................................... 5-84
5.24.2 Setting the Reset Peak Switch ..................................... 5-84
5.25 Module Statistics Menu Screen................................................. 5-84