User`s guide

Installing Optional Fast Ethernet Interface Modules

6H128-08 and 6H129-08 User’s Guide C-7

4. Carefully lower the Fast Ethernet Interface Module onto the standoffs

while inserting the module connector into the associated motherboard

connector. See Caution below.

Figure C-4 Installing the Fast Ethernet Interface Module

5. Press down firmly on the Fast Ethernet Interface Module until the pins

slide all the way into the motherboard connector. Ensure that the Fast

Ethernet Interface Module seats flush on the standoffs.

6. Secure the Fast Ethernet Interface Module with the screws saved in

Step 1 and Step 2.

7. Installation is complete.

CAUTION

When inserting the Fast Ethernet Interface Module into the

motherboard connector ensure that the pins do not bend, as

this can damage both the Fast Ethernet Interface Module and

the motherboard connector.

2159-33

FE-100TX

100

Front

Standoffs

Rear

Standoff

Module

Motherboard

Connector

Module

Connector