User`s guide

6H128-08 and 6H129-08 User’s Guide 5-1

CHAPTER 5

LOCAL MANAGEMENT

This chapter explains how to set up a management terminal to access

6H12X-08 Local Management, and how to use the Local Management

screens and commands. This chapter also provides instructions for

attaching an Uninterruptible Power Supply to the 6H12X-08 using the

Console Cable Kit provided with the 6C105 chassis.

5.1 OVERVIEW

Local Management for the 6H12X-08 consists of a series of screens,

some of which allow the management of the module and the 6C105

chassis, and some that report statistics. The management screens allow

the user to do the following tasks:

• Manage any interface module in the chassis via a connection to a

single interface module.

• Assign IP addresses and subnet masks to the 6H12X-08.

• Assign a default gateway.

• Control access to the 6C105 chassis and the 6H12X-08 module by

establishing community names.

• Download a new image of operating software.

• Designate which Network Management Workstations receive SNMP

traps from the 6H12X-08.

• Conﬁgure and have access to any SNMP MIB objects the module

supports.

• Monitor 6C105 chassis environmental information, which includes

power supply redundancy, power supply status, and fan tray status.

• View RMON, switch and interface statistics.

• Assign ports to operate in Auto-Negotiate (optional FE-100TX only),

standard or full duplex mode.

• Conﬁgure SmartTrunk ports to perform load sharing.