User`s guide

Chapter 5: Local Management
5-16 6H128-08 and 6H129-08 User’s Guide
SNMP COMMUNITY NAMES
The SNMP Community Names screen allows the user to enter new,
change, or review the community names used as access passwords for
device management operation. Access is limited based on the password
level of the user. For details, refer to Section 5.8.
SNMP TRAPS
The SNMP Traps screen provides display and configuration access to the
table of IP addresses used for trap destinations and associated community
names. For details, refer to Section 5.9.
CHASSIS ENVIRONMENTAL
The Chassis Environmental Information screen provides access to chassis
power supply status, power supply redundancy status and chassis fan tray
status. For details, refer to Section 5.10.
PORT REDIRECT FUNCTION
The Port Redirect Function screen allows the user to redirect traffic from
one or multiple modules and ports in the chassis to a specific destination
module or port. For details, refer to Section 5.11.
802.1Q VLAN CONFIGURATION
This menu option will only display if one or more modules installed in the
chassis have been configured to operate as IEEE 802.1Q switches. When
selected, this menu item opens the VLAN Main Menu screen. For details,
refer to the Cabletron Systems Port Based VLAN User’s Guide. Refer to
Section 5.15.9 for information on setting the Operational Mode field to
configure the modules to function as 802.1Q switches.