- CABLETRON Systems, Inc, SmartSwitch User's Guide 2E42-27, 2E42-27R, 2E43-27, 2E43-27R

Network Tools
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-77
Figure 5-30 Network Tools Screen
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
There are two categories of commands in the command set.
• Built-in Commands – Allow the user to access and manage network
devices. The commands are: arp, bridge, defroute, netstat, ping,
reset, show, traceroute, soft-reset, telnet, link_trap, and
atm_stp_state.
• Special Commands – Allow the user to exit from Network Tools. The
commands are done, exit, and quit.
-> help
090829
arp
netstat
show traceroute
defroute
ping
reset
bridge
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
Commands Available to User
Built in Commands:
Welcome to Network Tools
soft_reset
telnet
link_trap
atm_stp_state