- CABLETRON Systems, Inc, SmartSwitch User's Guide 2E42-27, 2E42-27R, 2E43-27, 2E43-27R

Installing Optional Fast Ethernet Interface Modules

2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide C-9

Figure C-4 Coverplate Removal

2. Remove the screw from the rear standoff. Save the screw.

3. See Figure C-5. Gently pull the faceplate of the 2E4X-27 forward to

allow room for the Fast Ethernet Interface Modules to be aligned over

the connector.

CAUTION

When installing an FE-100FX or FE-100F3 module into the

2E4X-27, remove the rubber plug on the module before

proceeding.

CAUTION

In the following step, take care when inserting the Fast Ethernet

Interface Module into the Motherboard connector, so that the

pins do not bend. Otherwise, the Fast Ethernet Interface Board

and the Motherboard could be damaged.

2251-38

Front

Standoffs

Rear

Standoff

Coverplate