- CABLETRON Systems, Inc, SmartSwitch User's Guide 2E42-27, 2E42-27R, 2E43-27, 2E43-27R

Chapter 5: Local Management
5-14 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
5.6 DEVICE CONFIGURATION MENU SCREEN
The Device Configuration Menu screen, Figure 5-8, provides access to
Local Management screens that allow you to configure and monitor
operating parameters, modify SNMP community names, set SNMP traps,
configure switch parameters and configure 2E4X-27 ports.
To access the Device Configuration Menu screen from the Device Menu
screen, use the arrow keys to highlight the DEVICE
CONFIGURATION menu item and press ENTER. The Device
Configuration Menu screen displays.
Figure 5-8 Device Configuration Menu Screen
NOTE
The following menu items on the Device Configuration Menu
screen may not display if the operational mode of the device is
set to SECURE FAST VLAN:
SWITCH CONFIGURATION
SMARTTRUNK CONFIGURATION
Refer to the Release Notes to see if the above screens are
supported in SECURE FAST VLAN mode. Section 5.7.9
describes how to set the operational mode.
Firmware Revision: XX.XX.XX
Device Configuration Menu
GENERAL CONFIGURATION
SNMP COMMUNITY NAMES
SNMP TRAPS
SWITCH CONFIGURATION
ETHERNET FULL DUPLEX CONFIGURATION
SMARTTRUNK CONFIGURATION
DEVICE SPECIFIC CONFIGURATION
19601_66
Device Type: 2E42-27
BOOTPROM Revision: XX.XX.XX
2E42-27 LOCAL MANAGEMENT
RETURN
EXIT