Specifications

9032073 E2 Device Views
2-15
Chassis Device View
Chassis Device Icon
Interface Icon Subviews Menu
This menu’s Configuration option opens the Configuration dialog box, which
allows you to enable or disable the selected port. For information on accessing
device-specific subviews, see Chapter 1, Introduction.
FDDI Label
This label provides access to the FDDI Icon Subviews menu. (Refer to
Figure 2-5.) Double-click this label to open the FDDI Application views
described in the Operator’s Reference.
FDDI Icon Subviews Menu
Table 2-11 describes each of the Icon Subviews menu selections available for
FDDI. For information on accessing device-specific subviews, see Chapter 1,
Introduction.
Table 2-10. Interface Status for the Physical (MIB II) Application
Color Status Description
Green ON Port is operational.
Blue OFF Port is off.
Yellow TST Port is in the test mode.
Table 2-11. FDDI Label Icon Subviews Menu
Menu Selection Description
FDDI Performance Opens the FDDI Performance view. (Not available for
FddiNoMAC).
FDDI Configuration Opens the FDDI Configuration view.
FDDI Station List Opens the FDDI Station List view. (Not available for
FddiNoMAC).
FDDI Model
Information
Opens the Model Information view for FDDI.