- cabletron systems User's Guide SmartSwitch 2E43-51, 2E43-51R

Repeater Statistics Screen
2E43-51/2E43-51R User’s Guide 5-83
Alignment Errors (Read-only)
Displays the number of alignment errors detected. Alignment errors occur
when the total number of bits in the packet are not divisible by eight due
to missing bits in the bytes contained in the packet.
Undersize Packets (Read-only)
Displays the number of packets received with a valid CRC and whose size
was less than the minimum Ethernet frame size of 64 bytes (not including
the preamble).
Oversize Packets (Read-only)
Displays the number of packets received with a valid CRC and whose size
exceeded 1518 data bytes (not including preamble).
Broadcasts (Read-only)
Displays the number of broadcasts transmitted and received.
Multicasts (Read-only)
Displays the number of multicasts transmitted and received.
Link Status (Read-only)
Indicates if the network or port is linked (Link) or not linked (No Link).
Admin Status (Read-only)
Indicates if the network or port is enabled (Enabled) or disabled
(Disabled).
PORT # (Command)
This command is used to select a port to view its statistics and those of its
associated Network. For details, refer to Section 5.25.1.
CLEAR COUNTERS (Command)
This command sets all statistics counters to zero. For details on how to
use this command, refer to Section 5.25.2.