- cabletron systems User's Guide SmartSwitch 2E43-51, 2E43-51R

FE-100F3

2E43-51/2E43-51R User’s Guide B-3

B.3 FE-100F3

The FE-100F3 shown in Figure B-3 uses an SC style connector that

supports single mode ﬁber optic cabling. Speciﬁcations for the FE-100F3

are listed in Table B-2, below.

Figure B-3 FE-100F3

Table B-2 Transmitter Power

Cable Type Worst Case Budget Typical Budget

8/125 µm ﬁber optic >10.0 dB <10.0 dB

12.5/125 µm ﬁber optic >10.0 dB <10.0 dB

NOTE

The transmitter power levels and receive sensitivity levels listed

are peak power levels after optical overshoot. A peak power

meter must be used to correctly compare the values given

above to those measured on any particular port. If power levels

are being measured with an average power meter, add 3 dB to

the measurement to compare the measured values to the

values listed above.

2251-68

FE-100f3