- cabletron systems User's Guide SmartSwitch 2E43-51, 2E43-51R

Chapter 5: Local Management
5-44 2E43-51/2E43-51R User’s Guide
5.13 HIGH SPEED INTERFACE CONFIGURATION MENU
SCREEN
The High Speed Interface Configuration Menu screen, Figure 5-20,
applies to the Fast Ethernet Interface Modules and the High Speed
Interface Module.
To access the High Speed Interface Configuration Menu screen from the
Device Specific Configuration Menu screen, use the arrow keys to
highlight the HIGH SPEED INTERFACE CONFIGURATION menu
item and press ENTER. The High Speed Interface Configuration Menu
screen displays.
Figure 5-20 High Speed Interface Configuration Menu Screen
NOTE
This screen does not display unless one or two Fast Ethernet
Interface Modules and a High Speed Interface Module (HSIM)
are installed.
If only the Fast Ethernet Interface Module(s) or the HSIM is
installed, then the respective Fast Ethernet Interfaces screen or
the HSIM Setup screen displays instead of the High Speed
Interface Configuration Menu screen.
Firmware Revision: XX.XX.XX
High Speed Interface Configuration Menu
FAST ETHERNET INTERFACES
HSIM
22511-53
Device Name: 2E43-51
BOOTPROM Revision: XX.XX.XX
2E43-51 LOCAL MANAGEMENT
Event Message Line
RETURN
SAVE
EXIT