Owner manual

2M46-04R/2M46-04RDC User’s Guide 3-1
CHAPTER 3
INSTALLATION
This chapter provides all instructions required to install the 2M46-04R. A
Phillips screwdriver is required to install the device.
3.1 UNPACKING THE 2M46-04R
Unpack the 2M46-04R as follows:
1. Open the box and remove the packing material protecting the
2M46-04R.
2. Verify the contents of the carton as listed in Table 3-1.
3. Remove the black and amber tape seal on the non-conductive bag to
remove the 2M46-04R.
4. Perform a visual inspection of the device. If there are any signs of
physical damage, contact the Cabletron Systems Global Call Center.
Only qualified personnel should install the 2M46-04R.
Table 3-1 Contents of 2M46-04R Carton
Item Quantity
2M46-04R 1
Antistatic Wrist Strap 1
Console Cable Kit 1
Rackmount Kit 1
Strain-Relief Bracket 1
Power Cords (2M46-04R only) 2
Release Notes 1