Specifications

Corrected and Known Anomalies
Enterprise Alarm Manager
Software Release Notes Page 67
Known Alarm Manager Anomalies in SPECTRUM 6.0
Problem 1: Newly created Alarm Descriptions in SpectroWATCH will not
display in the Alarm Manager if the Alarm Manager was running at the
time the watch and its custom Alarm Description was created. The alarm
itself is displayed but without the custom new Alarm Description.
Solution: Exit then restart the Alarm Manager. The new view will be
updated with your custom alarm description. This problem will be
corrected in a future release of SPECTRUM.
Problem 2: On the Windows NT platform, the Auto Raise option does not
bring the Alarm Manager to the front when a new alarm is created.
Solution: This problem will be corrected in a future release of
SPECTRUM.
Problem 3: When you have both the Netscape mail window and the main
Netscape window iconified, when you click the Hints button the Netscape
browser window toggles between the main Hints page and Netscape mail
window.
Solution: This is a problem with Netscape 4.0.3 and 4.0.4.
Problem 4: On the Solaris platform, when you create a duplicate model,
open the Alarm Manager from the duplicate model, open the popup view
navigator menu off the alarm model, then select device -> Chassis, you
receive the message: SpectroSERVER Error: Cannot recover, must
return to previous view.
Solution: Return to the previous view. This does not have any adverse
affects and seems to occur on the Olicom Wire Speed Bridge program
Model type GNSNMPDev. This problem will be corrected in the next major
release of SPECTRUM.