User`s guide

Conﬁguring

3-33

A SAP from:

A or B destined for the 0x1234 network will only be seen by A, B

and C

A or B destined for the 0x999 network will only be seen by A, B

and C

A or B destined for the 0x000 network will only be seen by A, B

and C

C destined for the 0x1234 network will only be seen by D and E

C destined for the 0x999 network will only be seen by D and E

C destined for the 0x000 network will only be seen by D and E

D destined for the 0x1234 network will only be seen by C and E

D destined for the 0x999 network will only be seen by C and E

D destined for the 0x000 network will only be seen by C and E

E destined for the 0x1234 network will only be seen by C and D

E destined for the 0x999 network will stay local to E

E destined for the 0x000 network will only be seen by C and D

3.10.4 Same Port in Multiple Workgroups

In the event that a port is deﬁned in workgroups of ALL and IP or

IPX, the forwarding criteria for IP packets or IPX packets will be

based on IP workgroup or IPX workgroup respectively. If the

IP\IPX broadcast does not match the IP or IPX workgroup the

packet will be forwarded out every other port. It will NOT revert

back to the criteria set for the ALL workgroup deﬁned on that port.

For instance, in Example #2 port 5 is a member of two

workgroups, RED of type ALL and BLUE of type IP. When station