User`s guide

Configuring
3-35
ipaddress P7 134.141.200.7 255.255.255.0
Results:
• Stations A, B and C IP communication will be switched between
ports 3, 4 and 5 since they are on the same subnet of 100.
• Stations D and E IP communication will be switched between
ports 6 and 7.
• If A, B or C needs to communicate with D or E and vice versa.
The receiving port will have the ability to route the packet to the
200 or 100 subnet respectively since routing is enabled on all
ports.
3.11 LOCAL AND REMOTE PORT MIRRORING
COMMANDS
The LCM command format for Local Port Mirroring is:
mirror port-range off
port-range - range of mirrored ports
off - to turn local port mirroring off on the ports specified
mirror port-range to port# oversize
port-range - range of mirrored ports
port# - the diagnostic port on the local ATX
oversize - discard or truncate; what to do with oversized
packets
P3 P7
ATX LAN Switch
P4 P5 P6
A
BCD
E