User`s guide

3-42
Configuring
option will turn off event logging. The event logging entries will be
kept in a circular buffer, and the logging entries will be overwritten
if necessary. If the “stopwhenfull” option is given, the logging
mechanism will cease entering logging entries into the event
logging queue once it is full. By default, entries will be
overwritten.
3.15.2 eventtrap
The LCM command format is:
eventtrap on|off
The eventtrap command will be used to determine whether event
logging entries will trigger SNMP traps. By default, events
generating SNMP traps will not be enabled.
3.15.3 eventdisplay
The LCM command format is:
eventdisplay [continuous]
The eventdisplay LCM command will get event logging entries
that are currently in the event logging queue.
The eventdisplay command will output continuous event log
entries, if specified, or the number of entries currently in the event
logging queue. The continuous display of the event logging
information to the console will be turned off by a Control-C.
3.16 CONFIGURING SOURCE ROUTE TRANSLATIONAL
BRIDGING (RIF CACHING)
SRTB allows the ATX to strip and cache routing information for
source route frames. Routing information (RIF) is used in source
route networks to indicate the path a frame has taken through the
network. This feature will enable the ATX to switch between
source route only networks like Token Ring and transparent