User`s guide

4-2
Monitoring and Managing the ATX
• General status and statistics
• IP status and statistics
• ICMP status and statistics
• UDP status and statistics
• SNMP status and statistics
• Spanning Tree status and statistics.
Note: All statistics counters are cleared when the ATX is reset. Counters
for individual ports are reset when the module is disabled and then
re-enabled.
Module statistics are generic to all modules and are included in
this chapter. Port statistics vary depending on the type of module
you are using. Port statistics are included in the individual module
documentation.
The following are the statistics available for each network in the
system:
• Number of packets generated by all end-nodes on each network
divided into the type of destination address.
• Number of packets forwarded from each network for each type
of destination address.
• Number of packets filtered divided into reason for filtering.
• Number of bytes generated by end-nodes on each network.
• Number of bytes forwarded or filtered from each network.
• Number of packets on each network that were sourced from
outside that network divided by type of destination address.
• Number of bytes on each network that were sourced from
outside that network.