User`s guide

Monitoring and Managing the ATX
4-13
address as source address match. [filterPktCnts]
• Number of packets sent from Segment A to Station B.
Configure pseudo source filter on port A with Station B's address
as destination address match. [filterPktCnts]
4.3 MONITORING STATUS
You can monitor the ATX with LCM, to see its status at a glance.
The LCM commands that allow the monitoring the status of the
ATX are described in the sections that follow.
4.3.1 Displaying Status
The status command displays the status of the entire ATX, and
automatically pages through the status of all of the ports, pausing
at each screen of information.
Note: Also use the status command to display status for individual ports.
The information displayed from the status <port number>
command varies from module to module and is therefore described
in the individual module manuals.
Type: status
LCM displays the following type of information.
Current Number of Learned Addresses: 133
Number of Defined Filters: 4
PPE CPU utilization is light
Module Type DiagStatus InUse TempOK Ports
1 PPE Passed True Normal 1
2 FDDI-IOM Passed True Normal 2
3 CSMA-IOM Passed True Normal 3
4 CSMA-IOM Passed True Normal 4
5 CSMA-IOM Passed True Normal 5-8
6 TR-IOM Passed True Normal 7-9
7 Turbo Passed True Normal