User`s guide

Monitoring and Managing the ATX
4-17
Address Type Port Age(secs) Frames-from Frames-to
10 00 90 c1 d1 1d Learned 6 0 1036886 8624
10 00 04 20 c9 39 Learned 6 0 63995 4432
4.3.3 Displaying Manufacturing Information
The ident command identifies ATX manufacturing information,
including the version of software that has been saved in flash
memory, the part number, revision number, and serial numbers of
all of the modules. It also displays the length of time since the ATX
was last rebooted.
To display the manufacturing information:
Type: ident
LCM displays the following type of information:
Software Currently Running: Version 2.3 12-JAN-94
Next Bootstrap: Version 2.3 12-JAN-94
System Up Time: 4 days, 11:03:06
Slot Module Type Part No. Rev Serial No.
1 Packet Processing Engine 512-0050 003 0002e4000c61
2 FDDI DAS 512-0014 009 0002E40001F7
3 Ethernet 512-0015 014 0002E400036a
4 HSSI/T1 512-0068 01A 0002E400054a
5 Quad Ethernet AUI 512-0044 002 0002E40002b4
6 Token Ring 512-0046 001 0002E400067a
4.4 MANAGING YOUR ATX
This section describes how you can manage your ATX by enabling
and disabling specific ports, turning modules on or offline,
changing the baud rate of your terminal connection or adding or
changing a community name.