User`s guide

5-10
Filters
Source Range Mask
MAC address mask to apply to the range of source MAC
addresses.
ff:ff:ff:ff:ff:ff is the default.
Destination Range
Either NA (not applicable), True (filter the packet if the destination
MAC address is within the range), or False (filter the packet if the
destination MAC address is outside of the range). NA is the
default.
Destination Range Start
Starting MAC address for the destination range of MAC addresses.
Destination Range End
Ending MAC address, for the destination range of MAC addresses.
Destination Range Mask
MAC address mask to apply to the range of destination MAC
addresses.
ff:ff:ff:ff:ff:ff is the default.
Port/Group Match
Either NA (not applicable), True (filter the packet if the receiving
port or group number matches), or False (filter the packet if the
receiving port or group number does not match). This is valid only
if the filter type is Exit. NA is the default.
Port/Group #
Decimal value for the number of the port or group through which
the packet entered the ATX. This is valid only if the filter type is