User`s guide

5-18
Filters
If you want the filter to have another index number, enter the
value you wish to use.
LCM displays the filter you have just entered and prompts you
whether you want to save it. Enter y (Yes) to save the filter or n
(No) to cancel it. If you save the filter, it is redisplayed.
5.7 MODIFYING A FILTER
You can make changes to filters that you have already set up. You
modify a filter in much the same way as you add a filter. LCM
prompts you through each field. To modify a filter, begin with the
steps below, then follow the prompts as if you were adding a filter:
1. Type: filters modify.
LCM prompts you for the filter index.
2. Enter the filter number.
LCM displays the filter type field. LCM prompts you through
all of the filter fields the same as when you add a filter. What
you had previously entered is displayed in brackets [ ] as the
default value. Make any changes you wish following the
instructions for adding a filter.
5.8 DELETING A FILTER
To delete a filter complete the following steps:
1. Type: filters delete.
LCM prompts you for the filter index.
2. Enter the filter number.
LCM responds filter deleted.
Note: All filter indexes are sequential, beginning with the number one.
When a filter is deleted, all filters are renumbered so that the filter
indexes remain sequential.