User`s guide

Filters
5-19
5.9 DISPLAYING A FILTER
To display a filter complete the following steps:
1. Type: filters display.
LCM prompts you for the port number.
2. Enter the port number.
LCM displays the filter which would look something like the
filter display shown below, depending on how you had set up
your filter:
Index: 1
Type: Entry
Pseudo: Yes
Source-range: True
Begin mac-add: 00:00:04:00:25:03
End mac-add: 00:00:04:40:15:03
Mask mac-addr: ff:ff:ff:ff:ff:ff
Dest-range: True
Begin mac-addr: 00:20:11:00:02:0a
End mac-addr: 00:40:02:15:22:01
Threshold: 5
Thres time: 3600
Pkt count: 179
Last source: 00:00:04:00:25:03
Operator: Or
5.10 FILTERING APPLICATION EXAMPLES
This section describes typical filtering applications which illustrate
how a network manager can use the unique filtering abilities of the
ATX to accomplish a variety of specific objectives. Specific
capabilities illustrated by these application examples include:
• Selectively filtering network traffic for security purposes.