User`s guide

6-6
Traps
fddimibSMTCFState (200) - Sent whenever the FDDI port's CFM
state has changed.The fddimibPORTMACIndicated (one or two
instances, depending upon whether the FDDI connection is a SAS
or a DAS) is also included.
fddimibMACUpstreamNbr (201) - Sent whenever the FDDI port's
upstream neighbor has changed.
configPowerAc1 (202) - Sent whenever the AC input to the unit's
first power supply transitions from on to off, and vice versa.
configPowerAc2 (203) - Sent whenever the AC input to the unit's
second power supply transitions from on to off, and vice versa.
configPowerDc1 (204) - Sent whenever the DC output of the
unit's first power supply transitions from on to off, and vice versa.
configPowerDc2 (205) - Sent whenever the DC output of the
unit's second power supply transitions from on to off, and vice
versa.
configPowerPresent1 (206) - Sent whenever the presence of
the unit's first power supply transitions from present to not
present, and vice versa.
configPowerPresent2 (207) - Sent whenever the presence of
the unit's second power supply transitions from present to not
present, and vice versa.
sfddiShortAddressing (208) - Sent whenever an FDDI packet
is received (other than Claim/Beacon packets) with 16 bit MAC
addresses.
sfddiSmtConditionsStatus (209) - Sent whenever any of the
conditions indicated by the value of the MIB variable
sfddiSmtConditions has occurred.
sfddiSrfConditionsStatus (210) - Sent whenever any of the
conditions indicated by the value of the MIB variable
sfddiSrfConditions has occurred.
sfddiSBFlag (211) - Sent whenever the FDDI port's optical
bypass becomes stuck, or un-stuck.