User`s guide

1-42
Introduction
[clear|[overwrite|stopwhenfull][add|del][FILTERS]]
to set or display event filter
eventtrap {on | off} to manage event/SNMP trap mapping
exit or logout to logout
filters {display|modify|add|delete} to manage port filters
help or ? this menu
ident for software version and board IDs
ipaddr [PORTS {a|cl|de|di} [ADR [MSK]]] to set or display IP addresses
iproute [PORT-RANGE [OPTIONS]] to set IP routing methods
ipxaddr [[[PORT#] NETWORK] FRAMING] to set IPX Network addresses
ipxroute [PORT-RANGE [OPTIONS]] to set IPX routing methods
mirror [remote|PORT-RANGE [OPTIONS]] to configure port mirroring
nbcache [PORT-RANGE [OPTIONS]] to set netbios caching on or off
nbentries [<#entries>] to set/display # nb cache entries
nbname {display|delete}[OPTIONS] to manage netbios cache
nbtimer [<age_timeout>] to set/display nb cache age timeout
offline MODULE# to stop an interface module
online MODULE# to (re)start an interface module
ping [-rvsx] HOST [DATASIZE [COUNT]] to send ICMP ECHO_REQUEST pkts to host
pvc [{disp|add|del}]PORT# VPI_RX VCI_RX VPI_TX VCI_TX [VIFN|PHYSPORT]
to manage PVCs
reboot [time SECONDS|cancel] to re-boot the unit after SECONDS
ringspeed [PORT-RANGE] [4 | 16] to set or display 802.5 ring speed
route [{add IPaddr GWaddr PORT# [Hops][IPmask] |{delete | display} IPaddr}]
to display routing table information
srbridge [BRIDGE#] to set source-routing bride number
srtb [{ip|ipx|other|all} {on|off}] [ste|are] to configure SRTB
status [PORTS] to display unit or port status
sttimer [TIMER-VALUE] to set or display st age time
srsegment [PORT# [SEGMENT#] [HOP-COUNT#]]to set source-routing ring number
traceroute [-m MAX_TTL][-q NQUERIES][-w WAIT] HOST_IP [DATA_SIZE]
to print the route pkts take to host
translate [PORT-RANGE [OPTIONS]] to set multimedia translations
traplog to display the most recent SNMP
trapstrunk [PORT-RANGE [{on | off}]] to set or display trunking status
workgroup [NAME [{delete | PORT-RANGE [INFO]}]]to set, delete or display